Cold Rolled Steel
introduction
Cold rolled steel (CR) is widely used in various industries such as automotive, home appliances, drum, pipe, tube, steel furniture, office equipment, etc. It is also used as the base metal for coated steel products.
Specification & Application
Cold rolled steel (CR) is widely used in various industries such as automotive, home appliances, drum, pipe, tube, steel furniture, office equipment, etc. It is also used as the base metal for coated steel products.
Specification & Application
Full-hard Quality
| Category | Standard and Grade | Thickness (mm) | Width (mm) | |||
|---|---|---|---|---|---|---|
| MS 2651 | JIS G3141 | SNI 07-3567 | JFS A2001 | |||
| Commercial quality | SPCC-1B | SPCC-1B | Bj DC – 1K | - | 0.20 ~ 2.60 | 600~1,250 |
Semi-hard Quality
| Category | Standard and Grade | Thickness (mm) | Width (mm) | Application | |||
|---|---|---|---|---|---|---|---|
| MS 2651 | JIS G3141 | SNI 07-3567 | JFS A2001 | ||||
| Semi-hard quality | SPCC-2D/B | SPCC-2D/B | Bj DC - 2K/R | - | 0.30~2.00 | 600~1,250 | Electrical/ Electronic/ Automotive Parts (Special Hardness Requirement) |
| SPCC-4D/B | SPCC-4D/B | Bj DC - 4K/R | |||||
| SPCC-8D/B | SPCC-8D/B | Bj DC - 8K/R | |||||
| - | SPCCT-2D/B | - | - | 0.30~2.60 | |||
| SPCCT-4D/B | |||||||
| SPCCT-8D/B | |||||||
Commercial Quality
| Category | Standard and Grade | Thickness (mm) | Width (mm) | Application | |||
|---|---|---|---|---|---|---|---|
| MS 2651 | JIS G3141 | SNI 07-3567 | JFS A2001 | ||||
| Commercial quality | SPCC-SD | SPCC-SD | Bj DC - SR | JSC270C | 0.30~2.60 | 600~1,314 | Automotive,Pipe, Drum, Furniture, Service Center Slit / Sheet etc. |
Drawing Quality
| Category | Standard and Grade | Thickness (mm) | Width (mm) | Application | |||
|---|---|---|---|---|---|---|---|
| MS 2651 | JIS G3141 | SNI 07-3567 | JFS A2001 | ||||
| Drawing Quality | SPCD-SD | SPCD-SD | Bj DC - SR | JSC270D | 0.30~2.00 | 600~1,250 | Automotive, Home Appliance, Speaker Frame, Satelite Panel, Welding Electrode,Wheel Barrow Tray, Fire Extinguisher, Canister etc. |
| SPCE-SD | SPCD-SD | Bj DD2 - SR | JSC270E | ||||
| SPCF-SD | SPCD-SD | Bj DD3 - SR | JSC270F | 0.30~1.80 | |||
| SPCG-SD | SPCD-SD | - | JSC260G | 0.30~1.60 | |||
Automotive
| Category | Standard and Grade | Thickness (mm) | Width (mm) | Application | |
|---|---|---|---|---|---|
| JIS G3135 | JFS A2001 | ||||
| Automotive drawing quality | SPFC340 | JSC340W/P | 0.30~2.60 | 600~1,250 | Automotive Structural Parts (Special Tensile Requirement) |
| SPFC370 | JSC370W/P | 0.30~2.30 | |||
| Automotive forming quality | SPFC390 | JSC390W/P | 0.30~2.00 | ||
| SPFC440 | JSC440W/P | ||||
